Home Machinist's Journal

Machining Projects => Shop Made Tooling and Fixtures => Topic started by: PJ on Nov 22, 2026, 11:18 AM

Title: TTS Collar for 3/4" Endmill
Post by: PJ on Nov 22, 2026, 11:18 AM
Another project Endmill collar) required to do another project(bearing carrier wrench).   
The Tormach cnc milling machine spindle I have uses a modified R8 collet to allow changing tools with repeatable Z stick out.   Problem is the TTS system tool holders max out at 1/2"diameter and I want to use 3/4" endmill for a bearing carrier wrench I'm making.  Since the TTS holder shanks are 3/4" I decided all I needed was to make a TTS like collar and attach it directly to the endmill.  Original plan was to shrink fit it but I blew the final pass on the bore and it ended up a beautiful slip-fit LOL.  So plan b is to just use set screws.  If the collar isnt perfectly cncentric it won't matter since the cutter is held by the collet itself. 
I still need to add set screws and surface grind 2 small flats on the endmill so it can't slip axially and lose Z position.  Why I always mess around making things available for very reasonable cost online I'll never know. 

As far as the wrench design goes, it would be soooo much easier if I just had a pc of 4" x 3/16 wall pipe laying around.  I do have a solid chunk of 4"dia crs that would work but I can't bring myself to turn 90% of it into chips.  Thus the 4 seperate "ears"  I do have 1/2" x 2" CRS pcs that will work perfectly however it makes the wrench base design more complicated.  The idea is to weld the ears into pockets milled in the base.  I plan to mill the base on the CNC also.
   
Title: Re: TTS Collar for 3/4" Endmill
Post by: PJ on Nov 22, 2026, 11:23 AM
Subject wrench I could just buy.. :smiley_chinrub: